Anytime a liquid product specifies that it needs to be introduced into an operating system QwikInjector® can be used as the injection medium. QwikShot® Acid Flush™, dyes, and oil additives are all common items that require an injection tool to use. Our injection tool is intentionally sized for very small doses so that customers won't accidently add non-condensables into a system.

1. Unscrew QwikInjector® top and fill with liquid additive, such as QwikShot. *Fill completely to ensure air does not get trapped in vessel

   Connect the QwickInjector® as Shown in the Illustrations Below.

   It is desirable to have liquid overflow over the edges. The overflow indicates that there is no excess air within the Injector.

2. Connect to the low side of the operating system FIRST.
3. Connect to the high side of the operating system LAST.
4. Open the valve on the manifold. The high side pressure will push the liquid into the low side of the system.

CAUTIONS

• Maximum Working Pressure is 500psig.
• Never leave QwikInjector® connected to the hoses. After use, always disconnect and disassemble.
• Depress the valve core to relieve pressure prior to unscrewing cap.
• Store the QwickInjector® with the cap loose to prevent thread binding and pressure build-up.

QT2000 - QwikCheck® Acid Test Kit™ - Detects acid in concentrations as low as 1 Part Per Miillion (PPM)

QT2500 - QwikShot® Acid Flush™ - Quickly flushes any harmful acids into the filter-drier of an operating system.

CLICK BELOW
TO REQUEST INFORMATION