Tightens quickly from the front with a Phillips head screwdriver. Has a durable brass interior shielded by nylon exterior to prevent shorting.

Most technicians have encountered the problem of a compressor with pitted or severely corroded spade terminals. The start-up current surge of repeated hot summer cycling eventually destroys the spade connector, sometimes leaving nothing but a corroded round post.

Mainstream has developed a patented product, QwikLug™, to solve this problem. QwikLug™ easily attaches to damaged or corroded spade connectors. We have considered the difficulty in these field installations - the lack of space around these spade terminals - and have developed a solution. Simply push the QwikLug™ connector on and tighten it from the front with a Phillips screwdriver. QwikLug™ comes with color coded leads for connecting to existing wiring (Leads not included with QT2800). The outer connector housing is a nylon insulator so the connectors can touch without shorting.

• QT2800 - 3 Lugs / Male Spades / NO Wire
• QT2810 - 10 AWG / 2 ft. Leads with nut
• QT2812 - 12 AWG / 2 ft. Leads with nut
• QT2910 - 10 AWG / 4 ft. Leads with spade
• QT2912 - 12 AWG / 4 ft. Leads with spade

1. Disconnect power.
2. Clean damaged or corroded terminals.
3. Verify crimped connector is inserted into QwikLug™ body with spade pressed against the long flat side of the opening. Crimped connector fits between terminal and screw.
4. Slide QwikLug™ over terminal and tighten screw with Phillips screwdriver.
5. Attach QwikLug™ lead to the unit (leads not included with QT2800).

CLICK BELOW
TO REQUEST INFORMATION