Can Access Valve
for Qwik-SF®

A durable, reusable Can Access Valve designed specifically for use with Qwik System Flush®.

1. Backseat valve in the closed position by turning knob of Can Access Valve fully counter clockwise. Twist Can Access Valve clockwise onto threaded tip of Qwik System Flush® as shown in photo #1
2. Attach hose to flare fitting on Can Access Valve as shown in photo #2.
3. Place the free end of the hose at the point of injection. If no flare fitting is available at the point of injection, either braze a flare fitting to the piping at the point of injection or use Line Set Flush Tool shown in photo #3 (QT1110)
4. If you used a Line Set Flush Tool, place it in the line set at the point of injection as shown in photo #4.
5. Twist the knob of the Can Access Valve clockwise to release Qwik System Flush^®, twist the knob counter clockwise to stop releasing Qwik System Flush^® (Be sure that Qwik System Flush® aerosol can is held upside down during the flushing procedure as shown in photo #5).