QwikPad® for Generators
- No More Pouring Concrete
- Universal Design
- The ONLY hurricane pad weighing less than 50lbs
QwikPad Features & Benefits
Weighs only 46lbs when unfilled and 330lb filled
The only lightweight wind-rated pad up to 180mph
UV Resistant, Ultra-Durable, and Warranty Protected
Made on the Space Coast in Florida, USA
QwikPad® For Generators
The only lightweight, easy-to-install, generator pad that meets hurricane-rated wind loading requirements up to 180 mph (QT8201, QT8210, QT8215, QT8220, QT8230, and QT8240)
- Dimensions: 56x35x5
- Material: Linear Low Density Polyethylene
- Pad Weight (Empty): 46lbs
- Pad Weight (Filled): 330lbs
- Rated Wind Speed: 180 MPH
Online Retailers
For bulk orders contact us directly
Call (321) 631-3550
Videos
The Unbreakable QwikPad for Generators
Additional Resources
*SEE FULL INSTALLATION INSTRUCTIONS INCLUDED WITH PRODUCT PURCHASE NOTE: In areas that experience freezing temperatures, only fill the QwikPad® for Generators 80% full for increased lifetime. This can be done by only filling the pad with water to a depth of 2.3 inches – when filling, use a dip-stick or straw to periodically check liquid height. Verify that an 80% fill still meets local wind regulations through our online calculator and information. This depth is true for both the 36 in and 40 in pad.
- Choose acceptable equipment pad size and anchoring method that meets wind loading requirements in your area. Use the load tables included with the QwikPad® for Generators.
- Tip pad towards fill port corner. This will cause gelling agent to collect near fill port for proper distribution when filling.
- If necessary, embed pad 1" deep in level compacted ground. Otherwise, simply place pad on level compacted ground in desired location.
- Fill pad with tap water - DO NOT OVERFILL. Water will solidify into gel over time.
- Install concrete or ground anchors, when required.
- Secure the equipment to the pad using included hardware and tie-down assemblies.
FAQ
